Wicked Lights W403iC Review

We hope you love the products we recommend and just so you know that as an Amazon Associate CoyoteHunting.org may earn from qualifying purchases.

If you’re in the market for a new lighting setup, the Wicked Lights W403iC is a great unit to take a good look at. It’s designed so that you can successfully target hogs, coyotes, foxes, bobcats, and other varmints.

The W403iC is an extremely high-powered night hunting light built by Wicked Lights specifically for long-range targeting conditions (up to 400 yard!).

As mentioned above, one of the great features of the W403iC Deluxe kit is that it comes with three interchangeable LED colors that are intensity control enabled.

These include:

  • Green
  • Red (our recommendation for coyote hunting)
  • White

The LED assembly features a 3-year warranty and uses the same LED as the A48iC and ScanPro iC Headlamp, so if you have one of those you can consider sharing LEDs.

Key Feature: Intensity Control Design

The Intensity Control design allows the light to be turned on directly to any intensity level by pre-setting the brightness dial and turning the light on. The Intensity control design allows for infinite brightness control.

Using the ‘intensity control design’, turning the light on at a dimmer setting and then slowly turning up the brightness helps to make sure that any animals in your area don’t run away.

The included coil cord intensity control tail cap makes it easier to power the W403iC efficiently while also giving you light intensity adjustment ability; right from the stock of your weapon.

Key Feature: Scan and Kill Technology

The built-in Scan and Kill Technology (Zoom Focus Bezel) allows the beam to be adjusted from spot to flood with any desired level of diffusion.

The removable bezel on the LED lights means you can easily change the color by just removing and replacing an installed light, depending on the hunting situation you find yourself in or simply your night hunting style. The deluxe kit comes with 3 color options.

The light output of the LED can be adjusted on-demand and with a focus, you’ll have absolute control on how intense the light is. And on top of that, it can be set to full intensity whenever you need it.

Check Price and Availability

Addon: Quick Detach Windage and Elevation Adjustable Mount Kit

The premium Quick Detach Windage and Elevation Adjustable Mount Kit is included and fits both 1″ and 30mm scope tubes. The Quick Detach Adjustable Light Mount will attach to any Picatinny rail and is easily added and removed from the scope or rail.

The windage and elevation adjustments allow the light to be dialed into the crosshairs exactly where it is wanted.

The kit comes with two 18650 Li-Ion rechargeable batteries and a 2-Position charger with AC-DC charge adaptors to keep you powered up for ages.

There’s also a carry case included so you can pack it away nicely when not in use.


The Wicked Lights W403iC is designed, serviced, and warrantied within the United States and is of very solid construction.

The unit is constructed with machined T6 Aircraft grade aluminum with type III hard anodization.

The W403IC LED assembly is constructed by an ISO9001 certified LED manufacture. This means that color is always consistent, and the LED chip is reliable.

The LED chip is water resistant, and rated for a 50,000hr life.

The W403iC is rated to operate between -30 ~ 120 degrees fahrenheit. There is an O-ring present to protect the internal components from the weather.

Check Price and Availability

Wicked Lights W403iC Kit Includes:

  • 1 x W403IC Light with Full Intensity Control Rheostat Tail Cap
  • 1 x RED LED with Intensity Control. Ideal for light shy predators (coyote, fox, bobcat)
  • 1 x 2-position battery charger with AC/DC adapters
  • 2 x Premium Li-ion batteries
  • 1 x Adjustable windage and elevation mount kit
  • 1 x Remote Intensity Control coiled cord tail cap
  • 1 x Plastic hard case
GEARED UP: Wicked Hunting Lights W403IC


Does the kit include mounts for an AR rail?

Yes, the included adjustable mount will fit on a picatinny rail.

How long do the batteries last?

The light W403iC drains one battery at a time, but the deluxe kit comes with two batteries. Each battery will last roughly 2.5 hours when used at full power when the batteries are completely charged. That means you get about 5 hours of continuous run time on full power. If you dim the light down, it will increase the run time. You can also charge one battery while the other is in use, so you can potentially extend the run time further.

Does the W403iC really reach 350 yards with the Red LED as is says?

Yep! it certainly does. I’ve tried a few different ones and this is definetly one of the best I’ve made use of.

Leave a Comment

Scroll to Top